TENSION o-ring oil resistant asbestos rubber motor gasket

Model Number: o-ring Brand Name: TENSION Key Specifications/Special Features: prodouct name:o-ring oil resistant asbestos rubber motor gasketProductNationalStandard: GB/T539-2008Colors:any,including green,black,blue,red.etcDescription :
TENSION oil resistant motor gasket is made from asbestos aramid fiber, other synthetic fibers, bonded with nitrile rubber/nbr rubber. It is manufacturered through high temperature and pressure, under rigorous quality control standard
suitable Medium:
aliphatic hydrocarbons
water
oil
gasoline
mild inorganic acids
mild organic acids
refrigerants
diluted alkalis
brine
alphatic solvents
industry gases
vegetable oils
synthetic oils
petroleum and derivatives
air
neutral solutions
general chemicals
steam and vapour
Application: connectionofoilpipeline, dieselengine, flange refiningequipmentanddistillpipeline.
Physical Properties:
Temperature,℃................................≤150
Pressure, MPa..................................≤1.5
Tensilestrength,MPa………………≥ 9
Density,g/cm3……………………...1.6~2.0
Compressibility,%……………….......7~17
Recovery,%……………………….....≥35
Sheet size: 1500×1350mm,1500*2000mm,1270×1270mmor1270×3810mm .
Gasket size: according to customer's request
Thickness: 0.3-5.0 mm.
oil resistant asbestos rubber sheet producing process:
Fiber opening + rubber shatter
--Mixer raw material--Rolling machine (put raw material on machine by heat steam working then make rubber and fiber agglutinate together)
--After heat dealing with regularly time then make push out the sheet
--Test the sheet whether OK, if OK then go to next step printed (this step is not necessary ,it depend on customer’s requirement)--Cut sheet as customer’s requirement or rolling sheet in packing put them to stock
packing:
General in standard export packing, with strong wooden cases or palletswith PVC paper, and also can be packed by the requires of clients.